Coating Materials – Liquid Epoxy

liquid epoxy

Industrial-Strength Coating & Repair Materials


Repair, Protect & Upgrade Your Concrete & Steel Surfaces

IBIX’s liquid epoxy (powered by U-Coat) is a 2-part solvent-free epoxy coating which provides anti-corrosive protection to concrete, steel and other substrates. Once cured, the surface coating will give a hard wearing gloss finish to the coated surface.

Working in partnership with U-Coat as a distributor allows IBIX to be a responsible, innovative and performance-driven company, committed to green and eco-friendly products and manufacturing processes.

Key Benefits:

  • Solvent free epoxy technology
  • Apply in 2 coats at 250 microns per coat
  • Apply by roller or brush
  • Available in a wide range of colors
  • Gloss finish
  • Incorporate aggregate for an anti-slip finish
  • High chemical and wear resistance 

Through it’s U-Coat channel, IBIX offers the following liquid epoxy & polyurethane based coatings and engineering repair materials:

 

Liquid Epoxy Repair Materials - Powered by U-Coat


101 Metal Repair Paste

101 Metal Repair Paste is a rebuilding paste for repairs to badly worn or damaged metallic surfaces. It is a two-component solvent free epoxy metal repair compound. The product has been designed for use on a wide range of metallic surfaces and once cured is readily machinable. It is suitable for emergency repairs or part of planned maintenance to equipment such as worn or damaged pump shafts, cracked pump or valve casings, scored hydraulic rams, worn bearing housings, damaged flanges, leaking tank seams and cracked engine blocks.

105 Aqua Stick

The 105 Aqua Stick is a fast curing metal repair putty for underwater applications. This two-component repair material in stick form cures underwater after mixing. It is a metal repair adhesive, which develops high mechanical strength in a short period of time. Suitable for emergency repairs to leaking pipe work, tank seams, and flanges.

108 Pipe Repair Tape

108 Pipe Repair Tape is a high-performance rapid curing moisture activated repair bandage specifically developed for the repair of leaking pipes. 108 Pipe Repair Tape is ideal for low-pressure systems operating up to 10 bar with a maximum operating temperature of 180C.

201 Ceramic Repair Paste

Similar to the 101 Metal Repair Paste, the 201 Ceramic Repair Paste is a Rebuilding paste grade for badly pitted and scarred surfaces. This paste is a two-component solvent free epoxy metal repair compound, designed for use on a wide range of metallic surfaces subject to abrasion and impact. Suitable for emergency repairs or part of planned maintenance to equipment such as worn impellers, damaged valves, eroded separator housings, damaged pump casings, eroded pipework, propellers, bow thrusters, rudders, corroded water boxes and eroded end plates and tube sheets.

204 Heavy Duty Ceramic Repair Paste

204 Heavy Duty Ceramic Repair Paste is a heavy-duty, high-abrasion and impact-resistant rebuilding paste incorporating ceramic beads for increased protection. For use on equipment such as chutes, hoppers, pipe bends, pump casings, etc., which are subject to high abrasive wear.

501 Resichem

501 Resichem is a high build solvent-free epoxy coating designed for the long-term protection of steel and concrete structures against corrosion, abrasion and chemical attack. The two-component product is highly resistant to marine and industrial environments, buried conditions, groundwater, effluents, salt water and a wide range of oils and chemicals. Typically used for Pipelines, tanks, chemical containment and bund areas, sheet and bearing piles and other land and marine structures.

561 Thermal Barrier Activator

561 Thermal Barrier Activator is a high build solvent-free low emissivity coating designed to reduce heat transfer from underlying metal surfaces thereby reducing heat loss and the risk of burns through personal contact. In addition, the coating provides long-term protection of steel structures against corrosion and reduces the potential for condensation on cold pipework. Used for pipelines, tanks, process vessels and other land and marine structures.

571 Concrete Patch Repair Activator

571 Concrete Patch Repair Activator is a light weight three part solvent free epoxy repair mortar designed for use on cementitious surfaces. The light weight nature of the material makes it ideal for repairs to overhead columns, sills and vertical concrete surfaces. Suitable for repairs to overhead sills and vertical concrete structures.

Ardex Concrete Repair

ARDEX Concrete Repair is a trowel-grade, cementitious topping for filling and repairing areas of indoor and outdoor concrete above, on or below grade. Engineered with Portland cement and select high-performance polymers, ARDEX CP readily bonds to concrete surfaces. It is easy to apply, hardens quickly, is freeze-thaw resistant, and produces a surface finish that is suitable for foot and rubber tire traffic. When mixed with water, the result is a creamy, smooth consistency that can be applied by trowel or screed.

 

Powder Coating Materials - Powered by Plascoat


PolyCon Thermoplastic Powder Coatings

PolyCon products, through the integration of properly graded aggregates into the surface material, can provide a long lasting friction micro-overlay that can restore old pavements to new friction standards, or provide new asphaltic surfaces with a friction and wearing surface. Polycon is composed of specially sized aggregate, enriched composite powder, and proprietary polymers.

PolySteel Thermoplastic Powder Coatings

Polysteel protects metal surfaces from UV rays, acid rain, tree sap, industrial fallout, insects, water spotting, road salt and more.

PPA 571 Aqua Pipe & Tank Coating

Plascoat PPA 571 Aqua has been developed specifically for the coating potable pipes, fittings and tanks. It can be used as an alternative to cement lining in ductile iron pipes or fusion bonded epoxy coatings on pipe fittings in the potable water and wastewater industries. Whether you are a specifier, water company or a pipe coater, Plascoat PPA 571 Aqua comes with a whole list of benefits including:

  • BPA free
  • Highly crack, chip and fracture resistant
  • Easy to apply
  • Always repairable

Plascoat Oil & Gas Pipelines Coating

Manufactured from polypropylene and Polyethylene, Plascoat Oil & Gas is a high-efficacy coating for oil and gas pipelines. It is a polyethylene powder coating that is suitable for flame spray applications for pipelines subjected to low temperatures with the following benefits:

  • Full compatibility with adjacent polyethylene coatings, in the case of field joint coatings
  • Suitability for 3-layer systems joints over FBE
  • Adherence to relevant parts of ISO FDIS 21809-1 Part A and all parts of ISO FDIS 21809-3
  • Has the capability with a single layer to perform the same role as a separate adhesive layer and top coat
  • Can build up thicknesses to greater than 3mm
  • Has an OIT greater than 40 min

 

Powered by:

U-Coat Logo
Plascoat Logo

Abrasive Blasting Media